Adding RAM to the computer with flashdisk and memory card

March 29, 2009

to improve the performance of the computer or the PC you can do with the increase in the capacity of your computer’s RAM capacity. However, adding RAM is not alias expensive cheap, 1 GB of RAM will cost approximately 250ribuan. if you use windows vista you can use a memory card or flash memory as additional RAM on your PC with the vista application called ReadyBoost. how to windows XP? Windows XP can also be used to increase the capacity of your RAM without using the RAM chip but using FD or MC. it can be done by using eBoostr to improve the capacity of your RAM. eBoostr can work on their own 4 devices at once and up to 4GB

how to use eBoostr?

1. EBoostr Install as normal, run-annya crack and restart your computer
2. After the restart, eBoostr will be activated immediately. At the panel appear select yes
3. Select perngkat set cache, in this case, of course, flash disk or MC you (in the circumstances connected to the computer). Then specify the capacity of the cache way
4. Wait briefly until a window appears “Do you want to build the cache file on the device now?” Select yes, then wait until the process is complete

after that you can use flash or RAM memory card as you do with mencolokkan flash disk to your computer. now what? you want to try eBoostr software also? please download eBoostr on the link below

Download Software

Download patch/crack

Got something to say?